![]() |
Thank you, from the BaitShop Boyz! |
.25-35 |
Post Reply
|
| Author | |
NH_Hunter
.416 Rigby
aka The Kid Joined: 13 June 2003 Location: United States Status: Offline Points: 3508 |
Post Options
Thanks(0)
Quote Reply
Topic: .25-35Posted: 23 January 2005 at 02:19 |
|
Where do you find bullets for this thing? I was lookin around
winchester's site and found that they chamber the new win 94 trails end
hunter in this caliber, so i did some lookin around but couldnt find
any 117 grain flat nose bullets. Would you have to use the hornady 117
grain round nose in its place or is the only option to cast your own?
|
|
|
Leverguns make me smile
Proud Left Handed Shooter |
|
![]() |
|
Guests
Guest
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 January 2005 at 04:32 |
|
NH thanks for the tip. Leave it to you to navigate all the major sites looking for new stuff. I love the 25-35. For 20 years I've tried to get marlin to make one. Even tried dozens of gunsmiths to make rebarrel a 30-30 marlin 336 in this cartridge. I'd like the 26 inch Oct barrel but I see that Winchester only makes it in a cowboy model with 20 inch round. They also say it is good for whitetail. I'd say in the proper hands it is decent deer gun to about 150 yds. In the proper hands. Might have to go look at one of those new trails ends. I also see Winchester is right on top of the wrong things as usual. they took the safety off the side and put it on the tang, while showing most of their lever lines with tang safeties. I don't thing they both fit in the same spot????? That 117 25 grainer was made originally for the 25-35, they changed it a little. I think they kept it in the line-up so that reloaders of 257 Roberts that were squeezed into shorter actions could get a shorter OAL with heavier bullets. My 257 Rob is on a long Ruger action, and I still use that round nose Hornady....deadly on deer. BEAR |
|
![]() |
|
Guests
Guest
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 January 2005 at 04:35 |
|
NH, I should have mentioned that the 60 grain Hornady flat nose works in the 25-20 and the 25-35 also. So you have a light varmint bullet and a decent deer load. If you don't follow the old stuff, you might look at the 25 Remington, it is a rimless version of the 25-35 for better feeding BEAR |
|
![]() |
|
tj3006
.416 Rigby
AKA King Leui VX-III Joined: 16 June 2003 Location: United States Status: Offline Points: 2373 |
Post Options
Thanks(0)
Quote Reply
Posted: 23 January 2005 at 05:27 |
|
That roundnose hornady is a good choace for the 2535. i personaly woulduse it for coyotes and mabye our small blacktails but a 30/30 is a much better deer round...tj3006
|
|
|
Freedom 1st tj3006
|
|
![]() |
|
Guests
Guest
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 January 2005 at 09:22 |
|
150 grain 30-30 is much better deer round than the 117-120 in the 25-35. But I like the 25-35 better for varmint. BEAR |
|
![]() |
|
Adobe Walls
.30/06 SpringField
Joined: 09 August 2003 Status: Offline Points: 373 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 January 2005 at 09:44 |
|
The Hornady 117 grain RN has a good reputation in the .25/35. I hope the new rifle means new bulk Winchester brass and 117 grain FN bullets will be on the market soon too. The .25/35 is a pussy cat to shoot and is very accurate in good rifles.AW
|
|
![]() |
|
Guests
Guest
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 January 2005 at 14:16 |
|
I also really like the .25-35 but in Oz good luck trying to find one. Down here lever actions mean one thing - .30-30. Even the .307 & 7-30 Waters never took off and they would have been ideal for probably 90% of Aussie game. The .25-35 I think is a really appealing little round (even if it is a bit of a wimp) and I'd love one for my wife due to mild recoil. MR MAX |
|
![]() |
|
Post Reply
|
|
|
Tweet
|
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |