![]() |
Thank you, from the BaitShop Boyz! |
Dram Equivalent |
Post Reply
|
| Author | |
Rockydog
Administrator
Joined: 13 June 2003 Location: United States Status: Offline Points: 3191 |
Post Options
Thanks(0)
Quote Reply
Topic: Dram EquivalentPosted: 26 January 2008 at 09:59 |
|
Just wondered how many guys understand and pay attention to Dram Equivalent information on shotgun shells. This system is about a hundred years old. I can't believe that no one has come up with something better than this. I'll take a stab at a definition as I understand it. The Dram Equivalent number relates directly to the number of drams of Black Powder it takes to move the same size shot payload at the same speed as the shells contained in the so labeled box. A dram = approximately 27.34 grains. The higher the D.E. the faster the load and the harder the kick. RD |
|
|
When the people fear their government, there is tyranny; when the government fears the people, there is liberty.
Thomas Jefferson |
|
![]() |
|
hedgepost
.30/06 SpringField
Joined: 02 January 2008 Status: Offline Points: 286 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 January 2008 at 00:55 |
|
RD, At least in 12 ga I think it's usefull and easily understood. With shot so high it starts to make sense to buy ammo, even if you're a high volume shooter. I have Kemen, Estate, and Nobel on hand now. Only the Nobel lists velocity instead of drams equivqlent. mike |
|
![]() |
|
Rockydog
Administrator
Joined: 13 June 2003 Location: United States Status: Offline Points: 3191 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 January 2008 at 01:51 |
|
Hedgepost, I'd like to see velocity and PSI on the box. I've got some older shotguns that I reload low pressure loads for but would like to buy a box of a shot size that I don't keep on hand etc. but I don't want to go over certain pressure limits. RD
|
|
|
When the people fear their government, there is tyranny; when the government fears the people, there is liberty.
Thomas Jefferson |
|
![]() |
|
Guests
Guest
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 January 2008 at 03:22 |
|
I think I agree with your Rocky. It is and estimate at best. Since the old black powder loads never got the velocity of todays shells, there really isn't any equivalent. It would be as dead as hogan's goat; except US ammo makers didn't want to put the velocity on the shell as there is little difference. So a the only value is that for the same shot load, from the same mfg. the higher the dram eq. the faster it "should be". I notice that recent years some mfgs. are listing the velocity in fps...great. Hope that makes all mfg take notice and list. For years I have shot a lot of trap and reloaded shotgun shells; including some super magnums for ducks and geese. And have to say that it is tough to tell if the extra 50-100 fps will make a difference in lead??? BEAR |
|
![]() |
|
hedgepost
.30/06 SpringField
Joined: 02 January 2008 Status: Offline Points: 286 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 January 2008 at 09:35 |
|
RD, Try the 7/8th Nobel or Fiochi. I can get them in 7.5 , 8 and 9s. They chrono 1180 or so. They may be available in larger shot sizes too. 7/8th in a grey winchester wad and a #25 bushing with 700x thru a mec 9000 makes a super soft load and patterns so evenly. Have no idea what the pressure is but that load won't cycle any 390 or 391 I've seen and often won't cycle an 1100. A #30 bushing with International Clays is similar. For that matter the 7/8th Nobel sometimes won't cycle a pal's Technys either. |
|
![]() |
|
hedgepost
.30/06 SpringField
Joined: 02 January 2008 Status: Offline Points: 286 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 January 2008 at 09:42 |
|
Bear, I don't think velocity means much, except to sell ammo. The Kemen 2 3/4 dram 1 1/8 oz load goes less than 1160 for me but is what I use if I don't think 7/8ths is enough. |
|
![]() |
|
Guests
Guest
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 January 2008 at 13:21 |
|
If you want light low pressure load buy "trap" loads. they have a velocity limit by the ATA, and will not hurt that old timer. Just bought a few hundred rounds of 1300 fps copper plated #5 12 gauger. Going to a pheasant tower shoot on the 15th. Be using and 11-87 this year. Leaving the double at home. spent hours over the last 5 month looking at price and performance on 12 guage....gave up bought the Winchester. Nothing is cheap (reasonable). These birds are fast flying toward you and 20-30 yards up. Unusual pheasant shot. For over dogs I use the 7/8 oz Estate loads. BEAR |
|
![]() |
|
Kingpin
.416 Rigby
aka Old IronSides Joined: 01 July 2003 Location: United States Status: Offline Points: 11716 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 January 2008 at 13:30 |
|
When it comes to shotgun loads, I seldom load any. I just buy what I need and carry on with what I am going to do. Mostly, for skeet, I use Winchester AA #9's. Coincidentally, I use them for home defense too. After all, what weighs more, 1 1/8 oz of #9's or, 1 1/8 oz of OO?.............................................Kingpin
|
|
|
There are times when a normal man must, spit in his hands, hoist the black flag, and begin slitting throats.
|
|
![]() |
|
.45 COLT
.22 LongRifle
Joined: 11 June 2003 Status: Offline Points: 47 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 January 2008 at 17:14 |
That's how it started out. Now DE is actually a defined as a set velocity for each weight and gauge. For example, a 12 Gauge shell with 1 1/8 ounces of shot and 2 3/4 DE has a velocity of 1,145 FPS. (Supposedly). A 3 1/2 - 1 3/8 - X is 1,240 FPS. Some boxes are labeled as "Dram Equivalent - Skeet". No matter the Gauge or shot weight, that's 1,200 FPS. Some boxes are labeled "Dram Equivalent - Max". That's just advertising hype. DC |
|
|
Have your musket clean as a whistle, hatchet scoured, sixty rounds powder and ball, and be ready to march at a minute's warning.
|
|
![]() |
|
vapodog
.22 LongRifle
Joined: 12 November 2004 Location: United States Status: Offline Points: 36 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 April 2009 at 16:23 |
|
Since mfrs have started listing velocity on the box, I'm paying more attention to that.....if the velocity isn't listed the dram equiv gets my attention.....but far prefer the velocity specs.
|
|
![]() |
|
Post Reply
|
|
|
Tweet
|
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |