Print Page | Close Window

Resizing 375H&H brass to 8mm RM

Printed From: The BaitShop
Category: FireArms, et cetera
Forum Name: Metallic Cartridge Handloading and Bullet Casting
Forum Description: Discuss reloading, bullet casting etc. here. We take no responsibility for the safety or validity of the loads mentioned in this forum. Start low and work up to what is safe in YOUR firearm!
URL: http://www.baitshopboyz.com/forum_posts.asp?TID=28097
Printed Date: 26 March 2026 at 17:52
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Resizing 375H&H brass to 8mm RM
Posted By: d4570
Subject: Resizing 375H&H brass to 8mm RM
Date Posted: 26 December 2024 at 16:47
Same case different shape and neck.
I ran some numbers and with the load I'm using and bullet the recoil is just a bit less than a 338 Lapua at 53 foot pounds.
I recently got some new Winchester brass for a 375. YOU CANT find 8mm RM brass any more. I already have around 350 brass but the brass were inexpensive and we had plenty of powder even at 83 gr each the bullets were also picked up very cheep. I went out today because it was cold and the wind was light. I have a membership in a small rifle range close to my house, by small I mean 2 tables at 100 and one at 2 and 3 hundred yards, but you can only use the long ones when no one else we shooting. I was by my self so I hung one target and shot all three tables. I hate fire forming so I try to make it fun. I got her done in an hour and a half.Big smile




-------------
Remember: Four boxes keep us free ,the soap box, the ballot box, the jury box, AND the cartridge box



Replies:
Posted By: Wing master
Date Posted: 27 December 2024 at 17:06
 That isn't too bad for fireforming. 

When you are fireforming do you load full powder charges? 


-------------
I have always considered myself to be quite the bullshitter, But ocasionally it is nice to sit back and listen to a true professional......So, Carry on.


Posted By: d4570
Date Posted: 28 December 2024 at 09:16
Kind of, not max but near minimum when you fire form it's easy to get an over presser for what ever reason. You can use trail boss and fill them up but what's the fun in that...

-------------
Remember: Four boxes keep us free ,the soap box, the ballot box, the jury box, AND the cartridge box


Posted By: BEAR
Date Posted: 28 December 2024 at 12:56
form firing with full loads and new bullets can get expensive..so enjoy the shooting.

-------------
“ The IQ and the life expectancy of the average American recently passed each other in opposite directions.”


Posted By: d4570
Date Posted: 28 December 2024 at 14:30
Yes it can. We use powder we have lots of and never use. I have acquired pounds and pounds of bullets of all caliber and weights. Mostly for free. 

-------------
Remember: Four boxes keep us free ,the soap box, the ballot box, the jury box, AND the cartridge box



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net