Metallic Cartridge Handloading and Bullet Casting

Print Page | Close Window

270 wsm load

Printed From: The BaitShop
Category: FireArms, et cetera
Forum Name: Metallic Cartridge Handloading and Bullet Casting
Forum Description: Discuss reloading, bullet casting etc. here. We take no responsibility for the safety or validity of the loads mentioned in this forum. Start low and work up to what is safe in YOUR firearm!
URL: http://www.baitshopboyz.com/forum_posts.asp?TID=20387
Printed Date: 26 March 2026 at 17:55
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 270 wsm load

Posted By: RobertMT
Subject: 270 wsm load
Date Posted: 24 September 2010 at 12:19

I tried a few new loads for my 270 wsm, ended up going back to what worked before. I tried imr4831, h4831sc and r19, didn't like near as well, moa instead of well under.

62.5gr IMR4350, 130AB, FC cases, CCI mag primers, and 2.820 COL. I necksize only and just bump back shoulder enough to chamber round. I tried to go long and get close to lands, unless I jam it and single load, it likes long jump anyway, so I just go to factory length, on the seconds I'm using, they have cannelure, so I'm using it, on firsts I just load it to mag length. This load is near book max, my rifles max is 66, but it shoots best here.

-------------
Want to stop Drunk Drivers, from Killing Sober Drivers? Ban Sober Drivers from Driving. That's how Gun Control Works.

NRA Benefactor Life, GOA Patriot, SAF