Thank you, from the BaitShop Boyz! |
Lets Talk 12GA From Hell |
Post Reply | Page <1 181920 |
Author | |
hubel458
.30/06 SpringField Joined: 19 January 2006 Location: United States Status: Offline Points: 364 |
Post Options
Thanks(0)
|
Here is sectioned 585 HE case in the middle, we first made from
another case, years ago before we had factory run of brass and it had perfect thickness on the sides and inside corrner. We could fire them many times without sides thinning.. First case is factory run of our 585 HE, 3rd is case that is too thick of sides and sticks at high pressures.. Pic of our factory run cases necked down to 375 and fired 4 times at high pressure on the right, with unfired case on the left. Our case is not perfect but does work...Ed |
|
Ed Hubel
|
|
hubel458
.30/06 SpringField Joined: 19 January 2006 Location: United States Status: Offline Points: 364 |
Post Options
Thanks(0)
|
About 416 cal bullets............
The heaviest 550 gr for Extreme ELR probably be best 8 to 1 twist , in 416 caliber bullet, and 520 gr 9.5 to 1, and 470gr 10 to one, Some barrels I picked up are 10 to 1....... Now a novel idea is to lighten rear of bullet with small shallow hole drilled in base, might do better long range.which would allow 10 to one barrel stabilize the heavier 550 gr bullets for ELR. Making bullet nose heavier makes it more stable in flight, needing less spin, like our hollow base 585 cal minie bullets only need 48 to 1 twist, or less while out regular 585 bullets need about 24 to 1 to stabilise them.............. The winner of the King Of 2 Mile shoot last week was using 416 Barrett with a 1 to 10 twist, with a 500 gr CEB Lazer bullet, ...Robert Brantley, with Manners Stocks.... Paul Philips was third with a 416... GOOD NEWS-- There is now an importer and seller of our 585 HE brass getting set up here, in US, hopefully will be in stock, few weeks........ http://bertrambrass.com .. .. Caleb Hallet.. Have got another intermediate size action besides the Montana PH our guys working on, to do speed testingwith. It is big long REM style action that can take our 416 HSM, ED
|
|
Ed Hubel
|
|
hubel458
.30/06 SpringField Joined: 19 January 2006 Location: United States Status: Offline Points: 364 |
Post Options
Thanks(0)
|
Experimental intermediate size action with the Montana PH, for comparison.
It is an experimental action for our 416 HSM, to do our speed testing with and get a better action than Cheytac size actions, for bigger case ELR use, without going all way up to more expensive, huge actions. It is big long round style action that can take our 416 HSM, almost 1.6" diameter action and .800" bolt, with locking lugs nearly as big as most BMG actions.... ED |
|
Ed Hubel
|
|
hubel458
.30/06 SpringField Joined: 19 January 2006 Location: United States Status: Offline Points: 364 |
Post Options
Thanks(0)
|
Here is picture of the bolt from the experimental action,
with our 416 HSM case in it. Note the amount of the base size of locking lugs, the amount of area on the bolt.. Here is link to guy doing special 585 HE in the EU, Good pictures............www.585he.cz We tested intermediate action with a 700HE barrel we had here. Just temporary to test strength. 1000 gr over 3100.. Action worked fine.. Ed.
|
|
Ed Hubel
|
|
Post Reply | Page <1 181920 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |